- With years of industry knowledge, we bring unparalleled expertise to every project.
- Our rigorous standards ensure top-notch quality in all our products.
- Constantly striving for new and improved solutions, we never stop innovating.
- Tailoring our services to your unique needs, we ensure complete satisfaction.
- Experience excellence with our dedicated support and customer-focused approach.
AHV 30kV 30mA High-voltage High-frequency Pulse Power Supply for Plasma
AHV 30kV 30mA High-voltage High-frequency Pulse Power Supply for Plasma
- AHV 30kV 30mA 900W series high-voltage high-frequency pulse power supply
- 4 digits LED display for voltage, current and frequency
- Rated output 0 to 30kV (60kVpp) 30mA 900W
- Fixed frequency 5kHz, 10kHz, 20kHz, 30kHz, 40kHz, 50kHz, 100kHz
- Adjustable frequency 5kHz to 100kHz
- Other voltage, frequency and power range at request
Quote Now
High-voltage high-frequency pulse power supplies for plasma applications are special devices designed to deliver precise and adjustable rapid-rise pulses to drive dielectric barrier discharge (DBD), corona discharge, and surface treatment. These devices typically provides voltage range 10kV to 30kV or more and frequency range (repetition rate) 1kHz to 20kHz or more.
AHV 30kV 30mA 900W series 30kV (60kV peak to peak) high-voltage high-frequency pulse power supplies high-voltage pulses at either a fixed frequency or an adjustable frequency range selectable from 1kHz to 100kHz.
Options of fixed frequency range: 5kHz, 10kHz, 20kHz, 30kHz, 40kHz, 50kHz, 100kHz
Options of adjustable frequency range: 5kHz ~ 10kHz; 10kHz ~ 20kHz; 10kHz ~ 30kHz; 20kHz ~ 30kHz; 20kHz ~ 40kHz; 20kHz ~ 50kHz; 30kHz ~ 40kHz; 30kHz ~ 50kHz; 50kHz ~ 100kHz
Plasma technology is widely applied across industries and research for its unique ionized gas properties.
- Semiconductor industry: Plasma-enhanced chemical vapor deposition (PECVD) and etching are essential for manufacturing computer chips, allowing for precise material modification at the microscopic level.
- Surface treatment & coating: used in plasma etching and deposition during semiconductor manufacturing, plasma jets for metal cutting and joining, surface treatment such as plasma coating, plasma nitriding, plasma polymerization.
- Medical applications: used to to sterilize medical instruments and eliminate biological hazards
- Industrial cutting & lighting: Plasma torches are used for high-precision cutting of metals. Plasma is also the source of light in fluorescent lamps, neon signs, and plasma TVs.
- Environmental & waste management: High-temperature plasma torches are used to gasify hazardous waste, breaking down toxic materials at the atomic level. It is also used to treat contaminated air and water.
Product Parameters
AHV 30kV 30mA High-voltage High-frequency Pulse Power Supply for Plasma
| Model (30kV) | Output Range | Model (30kV) | Output Range | |||||||
| Peak Voltage | Max Current | Power | Frequency | Peak Voltage | Max Current | Power | Frequency | |||
| AHV30-30-FF5K | 0~30kV | 0~30mA | 900W | Fixed 5kHz | AHV30-30-AF5-10K | 0~30kV | 0~30mA | 900W | Adjustable 5kHz to 10kHz | |
| AHV30-30-FF10K | 0~30kV | 0~30mA | 900W | Fixed 10kHz | AHV30-30-AF10-20K | 0~30kV | 0~30mA | 900W | Adjustable 10kHz to 20kHz | |
| AHV30-30-FF20K | 0~30kV | 0~30mA | 900W | Fixed 20kHz | AHV30-30-AF10-30K | 0~30kV | 0~30mA | 900W | Adjustable 10kHz to 30kHz | |
| AHV30-30-FF30K | 0~30kV | 0~30mA | 900W | Fixed 30kHz | AHV30-30-AF20-30K | 0~30kV | 0~30mA | 900W | Adjustable 20kHz to 30kHz | |
| AHV30-30-FF40K | 0~30kV | 0~30mA | 900W | Fixed 40kHz | AHV30-30-AF20-40K | 0~30kV | 0~30mA | 900W | Adjustable 20kHz to 40kHz | |
| AHV30-30-FF50K | 0~30kV | 0~30mA | 900W | Fixed 50kHz | AHV30-30-AF20-50K | 0~30kV | 0~30mA | 900W | Adjustable 20kHz to 50kHz | |
| AHV30-30-FF100K | 0~30kV | 0~30mA | 900W | Fixed 100kHz | AHV30-30-AF30-40K | 0~30kV | 0~30mA | 900W | Adjustable 30kHz to 40kHz | |
| AHV30-30-AF30-50K | 0~30kV | 0~30mA | 900W | Adjustable 30kHz to 50kHz | ||||||
| AHV30-30-AF50-100K | 0~30kV | 0~30mA | 900W | Adjustable 50kHz to 100kHz | ||||||
| Dimensions | 439W*133H*563D mm | |||||||||
| Weight | Approx 22kg | |||||||||
| AC input | 1φ3W, 220V±10% 50/60Hz | |||||||||
Why Choose Us.
Frequently Asked Questions
A DC power supply is to supply voltage and current in constant voltage (CV) or constant current (CC) mode within the rated output range. Such working characteristics is called a constant voltage/constant current automatic cross-over type. This permits continuous transition from constant current to constant voltage modes in response to the load change. The intersection of constant voltage and constant current modes is called the crossover point. Below figure shows the relationship between this crossover point and the load.
In CV mode, a regulated output voltage is provided. The output voltage remains constant as the load increases while the output current changes in response to the load changes, up till the present current limit point is reached. At that point, the output current becomes constant and the output voltage drops in proportion to the further increases in load.
Similarly, in CC mode, crossover from the CC to CV mode automatically occurs from a decrease in the load. A regulated output current is provided. The output current remains constant as the load decreases while the output voltage changes in response to the load changes.
A power supply with CV and CC operation mode can be operated in only one mode according to load situation. The power supply is in CV mode when the actual load is over the preset load capacity; and the power supply is in CC mode when the actual load is below the preset load capacity.
When the power supply is connected to a big capacitive load, it always causes increase to the output voltage in a power supply. The output voltage may make fast increase to the Over Voltage Protection point. It may also cause slow decrease when the output voltage is turned down.
To solve this problem, connect a power resistor in parallel to the output terminals of the power supply; at the same time, connect a diode in serial between output terminals and the load.
When an inductive load is connected to the power supply, it will cause a reverse polarity induction electric motive force when the power supply is turned on or off, or when preset the output voltage. The pulse noise caused by an inductive load will also affect the power supply, especially when the pulse noise has the same polarity with the output of power supply.
To avoid effect or damage to the power supply, connect a diode in serial between the output terminals of power supply and the load; at the same time, connect a power resistor and a capacitor in parallel to the load to make a R-C snubbed circuit, which will significantly restraint generation of the noise.
When use the power supply to charge a battery, such as accumulator and ni-mh battery, the recommended protection measures is to connect a diode between the power supply and the battery. When the output electrolytic capacitor of the power supply is charged, connecting a load (battery) may cause sparks. This is normal. After the two of them get to equal voltage, the sparks will disappear.
Even if the peak current of a pulse load, such as motor, bulb, DC-DC or DC-AC converter module, does not exceed the rated current of the power supply, it will also cause voltage drop or instability to the output.
A basic solution is to connect a inductor in serial between the power supply and the load. Or, choose a power supply with higher rated current.
If the pulse circuit has a small pulse width or low peak current, another solution is to connect a capacitor with large capacity. A reference to choose capacity of a capacity is: 1000uF capacity to a 1A current.
When the power supply is connected to a load that will cause reverse polarity current to the power supply output, the output voltage will increase, because the power supply cannot absorb the reverse polarity current from the load.
A solution is to connect a diode in serial between the output terminal and the load; at the same time, connect a discharge resistor in parallel to the load to absorb the reverse polarity current. When the reverse polarity current is a peak surge, connect the large electrolytic capacitor in parallel to the two ends of the load.
Get Quote Now!
Welcome to discuss your purchasing requirements with our customer service.
Get The
Catalogue
Document
From more than 10 years experiences in OEM & ODM services, our sales team and technical team are always available to check and discuss your requirement details.Whether you’re looking for reliable DC motors to enhance precision in your devices or powerful AC motors for robust industrial applications, we have you covered.
English 
Español 
Français 
Português 
Русский